Please choose a unique and valid username.
  • Worldwide Shipping
  • Discreet & Secure
You have no items in your shopping cart.

otonaJP Onahole Dry Stand

by otonaJP
perfect Stand to dry your male masturbator
Maker otonaJP
Drying your onaholes and any other male masturbators after washing can be a pain but otonaJP has found a solution for you. With the otonaJP Onahole Dry Stand you can dry up to four onaholes at once after washing them. Made with antibacterial stainless steel, the otonaJP Onahole Dry Stand is the perfect solution to make sure all fluids dry out of your onahole while mold has no chance. Also perfect to apply powder on your onaholes or antibacterial or cleaning spray. Handle your onaholes with ease with this high quality and solid Onahole Dry Stand.

The otonaJP Onahole Dry Stand features
  • Stand for drying your onahole or male masturbator after washing
  • made by antibacterial stainless steel
  • very solid and stable made
  • can dry up to 4 onaholes at once
  • otonaJP exclusive
Get US$0.42 Cashback Availability: Out of stock
Currently unavailable
This item is currently not available for ordering, and it may not be in stock again.

User Reviews

5 confirmed customer reviews Log in or register to review
  • | 3/3/2021

    Great Functionality and Utility

    I was intially doubted that something like this would work for drying Onaholes, however as I have many it becomes hard work to clean out all of them. By having this Onahole Dry stand I was able to clean my onaholes a lot more faster and efficiently reducing the amount of time I spend on maintenance. The only limitation I would say is that this is more for the smaller and single hole Onaholes rather than the more advanced and bigger ones. Overall, a great product by OtonaJP!

    ... view more
  • | 8/15/2020

    Great addition to the drying routine

    Have been using it for about 8 months and found it quite useful to completely dry my toys of all the moisture inside. Since having any king of moisture inside the onahole will eventually lead to bacteria growth (and a bad smell) it is absolutely crucial to dry your toys quickly and thoroughly after you’ve cleaned. For that purpose, I use the wipe stick included in “Kiteru Kiteru Maintenance Kit For Masturbators” to sponge the main amount of water inside the onahole, then put the latter on this dry stand and let it dry completely. I usually leave it to dry overnight, but it actually takes no more than 3-5 hours. After doing that routine none of my toys developed any kind of smell – a typical thing for me before. Yes, the downside of this stand is that it tips easily if you put 1 onahole on it, but I usually use 2-4 onaholes during one sitting, so that is not a problem for me. The stand seems to be made of stainless steel and have a very smooth surface, but you still have to be careful when trying to insert it into onaholes not to damage the inner surface. That being said, none of my toys developed any kind of tears after 8 months of use – I used big ones like meiki 005 and 011, “Sujiman Kupa Lolinco Virgo” as well as smaller ones – The Mouth of Truth Perorin, Gokusai Uterus, Tororichi. The height of the dry stand is about 16 cm, so if you’re are around that size or bigger, then I don’t see how it can break your toy (provided you insert it carefully) since your toy quietly sits on it, not being impaled constantly – like during the “intended” use for the onahole. The dry stand is also really sturdy – doesn’t wobble around, doesn’t have a “cheap” feeling to it. So I found this product to be very helpful to keep my toys dry and clean, definitely recommended.

    ... view more
  • | 6/27/2020

    Good start but needs improvement

    I bought this thinking it would be all i ever needed to dry onaholes and such and it does it's job but heavier onaholes you need to put something under/against it to hold it up otherwise the stand in my experience ends up coming out of the top pushing the material and that would destroy it very quickly. Otonajp could fix this by adding something that would hold onaholes up such as a piece of metal going horizontally across the stand with a bit hanging out the side to support it, each one could have it on different places incase the onahole was bigger and required more room. Pros +Works well, even better with some modification +Easy to set up and pack up + Doesn't take up much room Cons - Can go through the back/top of onaholes if they're heavy enough, destroying them

    ... view more
  • | 5/3/2019


    Ok so i know the guy above had problems with tearing. but if you throw something under one you know is going to be bottom heavy then it works. The puna 10000 for example is drying on there right now and i am using Alexa to hold the butt up to keep it from tearing. it's quite an amusing site to see actually lol. but yeah if your carfule with it, it can become a very great and easy way to keep gross things from the inside of your holes. no one wants to smell onahole smega right? lol

    ... view more
  • | 12/27/2018

    Good idea but with faults

    I saw this dry stand by chance and thought this would definitely be better than my former drying approach of putting the holes on a paper towel and leaning them against some bottles. I've been using it for a few weeks now and have a mixed opinion. + The holes are definitely dryer this way due to the metal bars keeping them open + Even tighter holes can be put on it without any issues since they will be wet inside + While not for public display, it looks way better than my previous drying method o The 4 drying positions seem useless to me. Why would you want to dry 4 holes at once? An onahole party with your friends? - It's way too light. I've mostly put "Smooth & Flat Girl's Laboratory" on it and I have to be careful about which side of it is more heavy to put in on the inner side of the dry stand, otherwise it simply falls over. And this is a very small and light hole. For me it's not really an issue but I imagine people with heavier and bigger holes will have trouble drying them unless balanced like in the product image. - While not an issue with the dry stand itself, it's worth noting that my hole mentioned above tore at the top due to the weight the top of the metal bars puts at the top of the hole. Depending on the drying position I could see the metal bars creating a dent in the hole. But even after repositioning it every time that happened it only took a few weeks to create a tear. I still like the idea and hope otonaJP improves this dry stand even though it looks like not all holes are "compatible" with this drying approach.

    ... view more
show all 5 reviews hide reviews

Others also bought

You might also like